Interzinc B. Storage Conditions: All painting materials shall be stored in a clean, dry, well ventilated place, protected from sparks, flame. A three component, metallic, zinc rich epoxy primer which passes Slip B coefficient. Interzinc B complies with SSPC Paint 20 and contains minimum 80%. Interzinc Call for Price. A two component high solids, low VOC metallic zinc- rich epoxy primer formulated on proprietary polymer technology which provides.
|Published (Last):||27 December 2017|
|PDF File Size:||5.53 Mb|
|ePub File Size:||8.41 Mb|
|Price:||Free* [*Free Regsitration Required]|
Interzinc – A k i r a
International Paint has operations in 54 countries worldwide and over 3, employees. All products listed in this section must be manufactured under the appropriate follow-up service with each container bearing the certified label mark.
Intezinc Atmosphere Applications – Industrial and coastal areas. Final color, gloss and finish will be determined and approved by the Architect.
Submit plan, section, elevation and perspective drawings as necessary to depict system configuration, design considerations and application procedures. A copy of the transport document and manufacturers conformance certificate shall be attached to the material delivery QC form. If this location falls within a mile radius of the project site, then Interchar can contribute to earning Materials and Resources Credit 5.
Coordinate interzincc Section and Contract Drawings for all Moderate Atmosphere areas of the project.
Verify that substrate and workspace temperature and humidity conditions are in accordance with requirements of this section. Surfaces Not to be Painted: Primer applied off site must be in accordance with the provisions of Section International Paint, LLC, which is located at: Submit manufacturer documentation that the fireproofing product complies with the specified contract requirements. Sequence and coordinate application of coatings with Work in other sections which would interfere with efficient protective coating application.
Substrate and air temperature shall be in accordance with the manufacturers requirements. Regional Materials- 20 percent extracted, processed and manufactured regionally: Temporary protection and heat shall be maintained at this minimum temperature for 24 hours before, during and 24 hours after material application.
Interior environments with permanent condensation and pollution. Structural steel and framing with reference to primer receiving fire protection materials. Interior chemical processing areas and swimming pools. The application must be witnessed by the Architect’s or Owner’s representative and is subject to their approval. Retain only coating systems specified and delete all others. Provide primer cut back areas a minimum three 3 inches 76mm from bolted connections and minimum twelve 12 inches mm from welded connections.
Do not apply coatings under environmental conditions outside manufacturer’s absolute limits. Areas will be designated by the Architect. Maintain environmental conditions temperature, humidity, and ventilation within limits recommended by manufacturer for optimum results.
Marine, offshore and coastal areas with high salinity. Interzin each finish product specified, two complete sets of color chips representing manufacturer’s full range of available materials. Equipment and application procedures must conform to the coating manufacturer’s application instructions. Severe Atmosphere Application – Industrial areas with high humidity and aggressive environments.
Interior environment interzunc high humidity and exposure to air pollution. Submit applicators current certification as a manufacturer trained and approved applicator. Grind smooth all weld spatter and defects prior to commencement of coating application. High Performance coatings applied in the field with Company specializing in manufacturing products listed in this section with a minimum of ten 10 years documented experience. Mild Atmosphere Applications- Urban and industrial atmospheres.
International Protective Coatings is the leading supplier of high performance Protective Coatings and forms part of Akzo Nobel, a market driven, technology based company specializing in Coatings, Chemicals and Pharmaceuticals.
Apply material at the required dry film thickness. Apply approved primer to properly cleaned substrate in accordance with manufacturer’s application instructions.